Cookie Img
 
 
 
AKASH PACK TECH PVT. LTD
 
 
 
Home » Products » VFFS Powder Filling Machinery » Fully Automatic Collar Type VFFS Machine

Fully Automatic Collar Type VFFS Machine

Fully Automatic Collar Type VFFS Machine
Fully Automatic Collar Type VFFS Machine
Product Code : SIngle Head Tablet
Brand Name : Akash Packaging
Product Description

Fully Automatic Collar Type VFFS Machine

We are an esteemed manufacturer and supplier of high quality Fully Automatic Collar Type VFFS Machine. These machines are customized as per the needs of our customers. As an ISO 9001:2008 certified company, we are well known for quality products and low maintenance in the industry. Our products are highly appreciated by the customers for their corrosion resistance, cost-effectiveness and easy operation. Fully Automatic Collar Type VFFS Machine is basically used in the packaging of sugar, salt, rice, coffee powder and other confectionery items.

Bagging Machine

  • Equipped with Allen Bradley PLC Controller.
  • Pneumatically operated longitudinal and cross sealing jaw assemblies suitable for laminates.
  • Pneumatically operated vertical sealing system best suitable for laminates with stroke adjustment facilities.
Auto-Print Mark Sensor Assembly
  • Independent assembly used for tracking mark sensor unit rear and forward.
  • Print Mark scanner used for scanning eye-marks for print registered bags.
  • The minimum width of eye-mark should be 8mm and in contrast with print layout.
Note: The digital control also allows tracking the registration system directly from display. MMI  Main Machine Interface

Web Aligning Assembly
  • Trolley based aligning of web at higher speeds to maintain precision in pouch geometry or ease in aligning center.
  • Floating unwind or web path to provide smooth operation.
  • A small displacement allows controlling entire web.
Web Unwind Assembly
  • 24VDC motor carrying aluminum roller with rubber rings for peripheral rotation around the web.
  • Aluminum roller used to decrease the wait and rubber rings support the grip of web roll.
  • This unit is used to maintain the constant tension in entire web at any point.
  • Consistency in tension leads to lesser slippage of paper driving pull rollers.
  • Limit switches to operate the DC motor and to ensure stop in case of film jam or at the end of film roll.
NOTE: Even though the unwind works with two sensing devices, PLC also controls the unwind time for safety measures.

Bag Draw down Mechanism
  • Self-aligning couplings support drive belts in better motion.
  • Pull Rollers adjusted pneumatically.
Perforations or Batch Assembly
  • Pneumatically activated knife for cutting the streamer at desired count.
  • The count is controlled digitally by PLC.
  • The activation of coil for activation of cylinder is transistor based.
  • Unit cylinder used for action of perforation.
  • Horizontal Sealing Jaw for laminates.
Set of Front & Rear Sealing Jaws complete with pneumatically activated knife, heaters and thermocouple
  • Standard design is V-groove in 1.5mm pitch, Seam width 8mm.
  • The integrated tool is capable of achieving Bottom Seal and the Top Seal of the next bag in a single cycle.
Longitudinal Sealing Jaw for laminates
  • Longitudinal Sealing tool suitable for vertical seal.
  • Jaw width 8mm.
  • Sealing tool is complete with cartridge heater and thermocouple.
Pouch/Bag Forming Assembly
  • Every Individual Paper Setting will contain
    • Individual Top and Bottom Plate.
    • Former Pipe and Pouch Former/Collar.
Machine Control Panel
  • Powder coated full size control panel.
  • The MMI (operator Interface) with keyboard, temperature indicators, controllers, and other machine control buttons and emergency stop switches.
  • The panel is protected against poor power supply quality or in other words the machine stops in case of over load, under voltage and single phasing and surges.
  • All wires and terminals are numbered inside the panel.
  • The temperature controls and setting are provided in the operator interface.
Filling System: (Indexed Cavity filling arrangement)
  • PTFE material used for manufacturing Disc and Disc base
  • stations for dosing material depending upon volume of product
  • Driven by main shaft, engaged or dis-engaged by manual clutch
Technical Specifications
Machine speed Up to 100 SPM depending on the product & sachet/pouch dimension.
Packing range Suitable to pack up to 1-50 No. of candies and above depending upon product to be packed
No. of Heads Single head
Max. roll width 400 mm
Max. roll dia 450 mm
Max length of pouch Up to 150 mm
Film draw mechanism Operations Servo/Stopper Motor
Web controller Options
a.) Electronic web edge control
b.) Pneumo hydraulic web edge controller
Compressed air 4 @ 6 kg/cm sq
Electrical power required Up to 4 KW
Plain Body Frame Option
MS with Powder coating
MS with SS cladding
Fully SS Built
Type of Sealing 4 Side Sealing
3 side Sealing
Center Sealing
Lap Sealing
Machine Dimension 2000mm X 1850mm x 1100mm(Height mm x Width mm x Length mm
Net weight 700 kg
Mechanical components EN series.
Control panel: Attached with main machine.
Doors and covers: Aluminum section with PC sheet
Photo cell: P & F

     


AKASH PACK TECH PVT. LTD.

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



 
 
 
AKASH PACK TECH PVT. LTD.
44 K.M. STONE, Delhi Mathura Road Sikri, Faridabad - 121004, Haryana, India
Key Personnel
Mr. Ankit Sehrawat (Managing Operator)
sales1@akashpack.com
Customer Care no. : +918860288888
  
 
 
AKASH PACK TECH PVT. LTD. All Rights Reserved.