Cookie Img
Akash Pack Tech Pvt. Ltd.
Inner Banner
Home » Products » VFFS Powder Filling Machinery » Candy Packaging Machine

Candy Packaging Machine

Candy Packaging Machine
Candy Packaging Machine
Product Code : AP-400P Collor Disk
Brand Name : Akash Packaging
Product Description

Candy Packing Machine

Bagging Machine
  • Equipped with Allen Bradley PLC Controller.
  • Pneumatically operated longitudinal and cross sealing jaw assemblies suitable for laminates.
  • Pneumatically operated vertical sealing system best suitable for laminates with stroke adjustment facilities.
Auto-Print Mark Sensor Assembly
  • Independent assembly used for tracking mark sensor unit rear and forward.
  • Print Mark scanner used for scanning eye-marks for print registered bags.
  • The minimum width of eye-mark should be 8mm and in contrast with print layout.
Note: The digital control also allows tracking the registration system directly from display. MMI - Main Machine Interface

Web Aligning Assembly
  • Trolley based aligning of web at higher speeds to maintain precision in pouch geometry or ease in aligning center.
  • Floating unwind or web path to provide smooth operation.
  • A small displacement allows controlling entire web.
Web Unwind Assembly
  • 24VDC motor carrying aluminum roller with rubber rings for peripheral rotation around the web.
  • Aluminum roller used to decrease the wait and rubber rings support the grip of web roll.
  • This unit is used to maintain the constant tension in entire web at any point.
  • Consistency in tension leads to lesser slippage of paper driving pull rollers.
  • Limit switches to operate the DC motor and to ensure stop in case of film jam or at the end of film roll.
NOTE: Even though the unwind works with two sensing devices, PLC also controls the unwind time for safety measures.

Bag Draw down Mechanism
  • Self-aligning couplings support drive belts in better motion.
  • Pull Rollers adjusted pneumatically.
Perforations or Batch Assembly
  • Pneumatically activated knife for cutting the streamer at desired count.
  • The count is controlled digitally by PLC.
  • The activation of coil for activation of cylinder is transistor based.
  • Unit cylinder used for action of perforation.
  • Horizontal Sealing Jaw for laminates.
Set of Front & Rear Sealing Jaws complete with pneumatically activated knife, heaters and thermocouple
  • Standard design is V-groove in 1.5mm pitch, Seam width 8mm.
  • The integrated tool is capable of achieving Bottom Seal and the Top Seal of the next bag in a single cycle.
Longitudinal Sealing Jaw for laminates
  • Longitudinal Sealing tool suitable for vertical seal.
  • Jaw width 8mm.
  • Sealing tool is complete with cartridge heater and thermocouple.
Pouch/Bag Forming Assembly
  • Every Individual Paper Setting will contain
    • Individual Top and Bottom Plate.
    • Former Pipe and Pouch Former/Collar.
Machine Control Panel
  • Powder coated full size control panel.
  • The MMI (operator Interface) with keyboard, temperature indicators, controllers, and other machine control buttons and emergency stop switches.
  • The panel is protected against poor power supply quality or in other words the machine stops in case of over load, under voltage and single phasing and surges.
  • All wires and terminals are numbered inside the panel.
  • The temperature controls and setting are provided in the operator interface.
Filling System: (Indexed Cavity filling arrangement)
  • PTFE material used for manufacturing Disc and Disc base
  • stations for dosing material depending upon volume of product
  • Driven by main shaft, engaged or dis-engaged by manual clutch
Technical Specifications
Machine speed Up to 400 SPM depending on the product & sachet/pouch dimension.
Packing range Suitable to pack up 1-50 No. of candies and above depending upon product to be packed
No. of Heads 4 Heads
Max. roll width 400 mm
Max. roll dia 450 mm
Max length of pouch 150 mm
Film draw mechanism Operations Servo/Stopper Motor
Web controller Options
a.) Electronic web edge control
b.) Pneumo hydraulic web edge controller
Compressed air 16 CFM @ 6 kg/cm sq
Electrical power required Up to 16 KW
Main Body Frame Option
MS with Powder coating
MS with SS cladding
Fully SS Built
Type of Sealing 4 Side Sealing
3 side Sealing
Center Sealing
Lap Sealing
Machine Dimension 1850mm X 4200mm x 2300mm(Height mm x Width mm x Length mm
Net weight 2000 kg
Mechanical components EN series.
Control panel: Attached with main machine.
Doors and covers: Aluminum section with PC sheet
Photo cell: P and F



Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.